View MAX16053AUTTG7_8870079.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

general description the max16052/max16053 are a family of small, low-power, high-voltage monitoring circuits with sequencing capability. these miniature devices offer very wide flexibility with an adjustable voltage threshold and an external capacitor- adjustable time delay. these devices are ideal for use in power-supply sequencing, reset sequencing, and power switching applications. multiple devices can be cascaded for complex sequencing applications. a high-impedance input (in) with a 0.5v threshold allows an external resistive-divider to set the monitored threshold. the output (out) asserts high when the input voltage rises above the 0.5v threshold and the enable input (en) is asserted high. when the voltage at in falls below 0.495v or when the enable input is de-asserted (en = low), the output deasserts (out = low). the devices provide a capacitor programmable delay time from when the voltage at in rises above 0.5v to when the output is asserted. the max16052 offers an active-high open-drain output while the max16053 offers an active-high push-pull output. both devices operate from a 2.25v to 28v supply voltage and feature an active-high enable input. the max16052/ max16053 are available in a tiny 6-pin sot23 package and are fully specified over the automotive temperature range (-40c to +125c). beneits and features less external circuitry results in smaller solution size ? open-drain (28v tolerant) output allows interfacing to 12v intermediate bus voltage ? operates from v cc of 2.25v to 28v ? small 6-pin sot23 package ideal for use in power-supply sequencing, reset sequencing, and power-switching applications ? active-high logic-enable input ? 1.8% accurate adjustable threshold over temperature fully specified from -40c to +125c for reliability in extreme temperatures low supply current (18a typ) reduces power consumption applications medical equipment intelligent instruments portable equipment computers/servers critical p monitoring set-top boxes telecom dc-dc converter dc-dc converter in en out gnd cdelay v cc in v cc en out gnd cdelay out in en 12v 0.9v max16052 max16052 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits 19-4144; rev 5; 3/16 typical operating circuit downloaded from: http:///
(all voltages referenced to gnd.) v cc ........................................................................-0.3v to +30v out (push-pull, max16053).....................-0.3v to (v cc + 0.3v) out (open-drain, max16052)................................-0.3v to +30v en, in ........................................................-0.3v to (v cc + 0.3v) cdelay....................................................................-0.3v to +6v input/output current (all pins)..........................................20ma continuous power dissipation (t a = +70c) 6-pin sot23 (derate 8.7mw/c above +70c)........695.7mw operating temperature range .........................-40c to +125c junction temperature.......................................................+150c storage temperature range .............................-65c to +150c lead temperature (soldering, 10s) .................................+300c soldering temperature (reflow) .......................................+260c (v cc = 2.25v to 28v, v en = v cc , t a = t j = -40c to +125c, unless otherwise specified. typical values are at v cc = 3.3v and t a = +25c.) (note 1) parameter symbol conditions min typ max units supply operating voltage range v cc 2.25 28 v undervoltage lockout uvlo v cc falling (note 2) 1.8 2 v v cc supply current i cc max16052, no load v cc = 3.3v 18 37 a v cc = 12v 23 45 v cc = 28v 38 61 max16053, no load v cc = 3.3v 22 47 v cc = 12v 29 57 v cc = 28v 44 71 in threshold voltage v th v in rising, 2.25v v cc 28v 0.491 0.500 0.509 v hysteresis v hyst v in falling 5 mv input current i in v in = 0 or 28v -110 +25 +110 na c delay c delay charge current i cd v cdelay = 0v 200 250 300 na c delay threshold v tcd v cdelay rising 0.95 1.00 1.05 v c delay pulldown resistance r cdelay v cc 2.25v, i sink = 200a 15 60 ? v cc 3.3v, i sink = 1ma 15 60 en en low voltage v il 0.5 v en high voltage v ih 1.4 v en leakage current i leak v en = 0 or 28v -110 +20 +110 na out out low voltage (open-drain or push-pull) v ol v cc 1.2v, i sink = 90a 0.2 v v cc 2.25v, i sink = 0.5ma 0.3 v cc > 4.5v, i sink = 1ma 0.4 out high voltage (push-pull, max16053) v oh v cc 2.25v, i source = 500a 0.8 x v cc v v cc 4.5v, i source = 800a 0.9 x v cc out leakage current (open-drain, max16052) i lkg output not asserted low, v out = 28v 150 na max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 2 absolute maximum ratings stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. electrical characteristics downloaded from: http:///
(v cc = 2.25v to 28v, v en = v cc , t a = t j = -40c to +125c, unless otherwise specified. typical values are at v cc = 3.3v and t a = +25c.) (note 1) note 1: all devices are production tested at t a = +25c. limits over temperature are guaranteed by design. note 2: when v cc falls below the uvlo threshold, the outputs deassert (out goes low). when v cc falls below 1.2v, the output state cannot be determined. note 3: during the initial power-up, v cc must exceed 2.25v for at least 0.5ms before out can go high. parameter symbol conditions min typ max units timing in to out propagation delay t delay v cc = 3.3v, v in rising, v in = v th + 25mv max16052, 100k pullup resistor, c cdelay = 0 30 s max16053, c cdelay = 0 30 max16052, 100k pullup resistor, c cdelay = 0.047f 190 ms max16053, c cdelay = 0.047f 190 v cc = 12v, v in rising, v in = v th + 25mv max16052, 100k pullup resistor, c cdelay = 0 30 s max16053, c cdelay = 0 30 t dl v cc = 3.3v, v in falling, v in = v th - 30mv 18 v cc = 12v, v in falling, v in = v th - 30mv 18 startup delay (note 3) v cc = 2.25v, v in = 0.525v, c cdelay = 0 0.5 ms v cc = 12v, v in = 12v, c cdelay = 0 0.5 en minimum input pulse width t mpw 1 s en glitch rejection 100 ns en to out delay t off from device enabled to device disabled max16052, 100k pullup resistor v cc = 3.3v 250 ns v cc = 12v 300 max16053 v cc = 3.3v 350 v cc = 12v 400 en to out delay t prop from device disabled to device enabled max16052, 100k pullup resistor, c cdelay = 0 v cc = 3.3v 14 s v cc = 12v 14 max16053 v cc = 3.3v 14 v cc = 12v 14 max16052, 100k pullup resistor, c cdelay = 0.047f 190 ms max16053, c cdelay = 0.047f 190 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 3 electrical characteristics (continued) downloaded from: http:///
figure 1. max16052/max16053 timing diagram (c cdelay = 0) v cc v th + 25mv v th - v hyst v th v ih v ih v ih v il t prop t dl t delay t off t prop v ol v oh t < t mpw t > t mpw in en out v uvlo t < t prop 5% v ih v il max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 4 downloaded from: http:///
(v cc = 3.3v and t a = +25c, unless otherwise noted.) output low voltage vs. sink current max16052/53 toc05 i sink (ma) output low voltage (v) 4.0 3.5 0.5 1.0 2.0 2.5 1.5 3.0 0.5 1.0 1.5 2.0 2.5 0 0 4.5 v cc = 28v v cc = 12v v cc = 5v v cc = 3.3v v cc = 2.25v supply current vs. supply voltage max16052/53 toc01 v cc (v) i cc (a) 24 20 16 12 8 4 3 6 12 9 15 18 21 24 27 30 33 0 0 28 max16052v in = 0v in threshold voltage vs. temperature max16052/53 toc03 in threshold voltage (mv) 498.5 499.0 499.5 500.0 500.5 501.0 501.5 502.0498.0 temperature (c) 110 95 65 80 -10 5 20 35 50 -25 -40 125 output high voltage vs. source current max16052/53 toc06 i source (ma) output high voltage (v) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 5 10 15 20 25 30 0 0 4.5 v cc = 12v v cc = 28v v cc = 2.25v v cc = 5v v cc = 3.3v supply current vs. temperature max16052/53 toc02 temperature (c) i cc (a) 110 95 65 80 -10 5 20 35 50 -25 8 12 16 20 24 28 32 36 40 44 4 -40 125 max16052 v cc = 12v v cc = 3.3v v cc = 2.25v v cc = 5v v cc = 28v out delay vs. c cdelay max16052/53 toc04 c cdelay (nf) out delay (ms) 900 800 600 700 200 300 400 500 100 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 0 0 1000 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits maxim integrated 5 www.maximintegrated.com typical operating characteristics downloaded from: http:///
(v cc = 3.3v and t a = +25c, unless otherwise noted.) maximum transient duration vs. input overdrive max16052/53 toc07 input overdrive (mv) maximum transient duration (s) 100 10 50 100 150 200 250 300 0 1 1000 reset occurs above this curve enable turn-on delay (max16053) max16052/53 toc08 10s/div en2v/div out2v/div enable turn-off delay (max16053) max16052/53 toc09 400ns/div en2v/div out2v/div in leakage current vs. temperature max16052/53 toc10 temperature (c) in leakage current (ma) 110 95 65 80 -10 5 20 35 50 -25 -8 -6 -4 -2 0 2 4 6 8 10 -10 -40 125 v cc = 28v v cc = v en = v in en leakage current vs. temperature max16052/53 toc12 temperature (c) en leakage current (na) 110 95 65 80 -10 5 20 35 50 -25 -8 -6 -4 -2 0 2 4 6 8 10 -10 -40 125 v cc = 28v v cc = v en = v in in leakage current vs. in voltage max16052/53 toc11 v in (v) in leakage current (na) 26242220 14 1816 6 8 10 12 42 -3 -2 -1 0 1 -4 0 28 v cc = 28v v cc = v en en leakage current vs. en voltage max16052/53 toc13 v en (v) en leakage current (na) 26 24 20 22 1412 1816 4 6 108 2 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 0.8 1.0 -1.0 0 28 v cc = 28v v cc = v in max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits maxim integrated 6 www.maximintegrated.com typical operating characteristics (continued) downloaded from: http:///
max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 7 pin description gnd out in 1 6 c delay 5 v cc en max16052max16053 sot23 top view 2 3 4 pin coniguration pin name function 1 en active-high logic-enable input. drive en low to immediately de-assert the output to its false state (out = low) independent of v in . with v in above v th , drive en high to assert the output to its true state (out = high) after the adjustable delay period. connect en to v cc , if not used. 2 gnd ground 3 in high-impedance monitor input. connect in to an external resistive-divider to set the desired monitor threshold. the output changes state when v in rises above 0.5v and when v in falls below 0.495v. 4 out active-high sequencer/monitor output. open-drain (max16052) or push-pull (max16053). out is asserted to its true state (out = high) when v in is above v th and the enable input is in its true state (en = high) after the capacitor-adjusted delay period. out is de-asserted to its false state (out = low) immediately after v in drops below 0.495v or the enable input is in its false state (en = low). the max16052 open-drain output requires an external pullup resistor. 5 v cc supply voltage input. connect a 2.25v to 28v supply to v cc to power the device. for noisy systems, bypass with a 0.1f ceramic capacitor to gnd. 6 c delay capacitor-adjustable delay input. connect an external capacitor (c cdelay ) from c delay to gnd to set the in-to-out and en-to-out delay period. for v in rising, t delay = (c cdelay x 4.0 x 106) + 30s. for en rising, t prop = (c cdelay x 4.0 x 10 6 ) + 14s. downloaded from: http:///
detailed description the max16052/max16053 family of high-voltage, sequencing/supervisory circuits provide adjustable voltage monitoring for inputs down to 0.5v. these devices are ideal for use in power-supply sequencing, reset sequencing, and power-switching applications. multiple devices can be cascaded for complex sequencing applications. the max16052/max16053 perform voltage monitoring using a high-impedance input (in) with an internally fixed 0.5v threshold. when the voltage at in falls below 0.5v or when the enable input is de-asserted (en = low) out goes low. when v in rises above 0.5v and the enable input is asserted (en = high), out goes high after a capacitor-adjustable time delay. with v in above 0.5v, the enable input can be used to turn on or off the output. table 1 details the output state depending on the various input and enable conditions. supply input (v cc ) the device operates with a v cc supply voltage from 2.25v to 28v. in order to maintain a 1.8% accurate threshold at in, v cc must be above 2.25v. when v cc falls below the uvlo threshold, the output deasserts low. when v cc falls below 1.2v, the output state is not guaranteed. for noisy systems, connect a 0.1f ceramic capacitor from v cc to gnd as close to the device as possible. figure 2. simplified functional diagram table 1. max16052/max16053 in en out v in < v th low low v in < v th high low v in < v th low low v in < v th high out = high impedance (max16052) out = v cc (max16053) control logic en in cdelay 250na 1.0v 0.5v v cc internal v cc /uvlo ref out gnd max16052 control logic en in cdelay 250na 1.0v 0.5v v cc internal v cc /uvlo ref out gnd max16053 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 8 downloaded from: http:///
monitor input (in) connect the center point of a resistive-divider to in to monitor external voltages (see r1 and r2 of figure 4 ). in has a rising threshold of v th = 0.5v and a falling threshold of 0.495v (5mv hysteresis). when v in rises above v th and en is high, out goes high after the adjustable t delay period. when v in falls below 0.495v, out goes low after a 18s delay. in has a maximum input current of 60na, so large value resistors are permitted without adding significant error to the resistive-divider. adjustable delay (cdelay) when v in rises above v th with en high, the internal 250na current source begins charging an external capacitor connected from c delay to gnd. when the voltage at c delay reaches 1v, the output asserts (out goes high). when the output asserts, c cdelay is immediately discharged. adjust the delay (t delay ) from when v in rises above v th (with en high) to out going high according to the equation: 6 delay cdelay t c (4 10 ) (30s) = ?+ where t delay is in seconds and c cdelay is in farads. enable input (en) the max16052/max16053 offer an active-high enable input (en). with v in above v th , drive en high to force out high after the capacitor-adjustable delay time. the en-to-out delay time (t prop ) can be calculated from when en goes above the en threshold using the equation: 6 prop cdelay t c (4 10 ) (14s) = ?+ where t prop is in seconds and c cdelay is in farads. drive en low to force out low within 300ns for the max16052 and within 400ns for the max16053. output (out) the max16052 offers an active-high, open-drain output while the max16053 offers an active-high push-pull output. the push-pull output is referenced to v cc . the open-drain output requires a pullup resistor and can be pulled up to 28v. applications information input threshold the max16052/max16053 monitor the voltage on in with an external resistive-divider ( figure 4 ). r1 and r2 can have very high values to minimize current consumption due to low in leakage currents (60na max). set r2 to some conveniently high value (200k for 1% additional variation in threshold, for example) and calculate r1 based on the desired monitored voltage using the following formula: monitor th v r1 r2 1 v ? ?? = ???? where v monitor is the desired monitored voltage and v th is the reset input threshold (0.5v). pullup resistor values (max16052 only) the exact value of the pullup resistor for the open-drain output is not critical, but some consideration should be made to ensure the proper logic levels when the device is sinking current. for example, if v cc = 2.25v and the pullup voltage is 28v, keep the sink current less than 0.5ma as shown in the electrical characteristics table. as a result, the pullup resistor should be greater than 56k. for a 12v pullup, the resistor should be larger than 24k. note that the ability to sink current is dependent on the v cc supply voltage. ensuring a valid out down to v cc = 0v (push-pull out) in applications in which out must be valid down to v cc = 0v, add a pulldown resistor between out and gnd for the push-pull output (max16053). the resistor sinks any stray leakage currents, holding out low ( figure 3 ). the value of the pulldown resistor is not critical; 100k is large enough not to load out and small enough to pull out to ground. the external pulldown cannot be used with the open-drain out output. figure 3. ensuring out valid to v cc = 0v gnd out v cc v cc 100k ? max16053 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 9 downloaded from: http:///
typical application circuits figure 4 through figure 6 show typical applications for the max16052/max16053. figure 4 shows the max16052 used with a pmosfet in an overvoltage protection circuit. figure 5 shows the max16053 in a low-voltage sequencing application using an nmosfet. figure 6 shows the max16053 used in a multiple output sequencing application. using an n-channel device for sequencing in higher power applications, using an n-channel device reduces the loss across the mosfet as it offers a lower drain-to-source on-resistance. however, an nmosfet requires a sufficient v gs voltage to fully enhance it for a low r ds_on . the application shown in figure 5 shows the max16053 in a switch sequencing application using an nmosfet. similarly, if a higher voltage is present in the system, the open-drain version can be used in the same manner. power-supply bypassing in noisy applications, bypass v cc to ground with a 0.1f capacitor as close to the device as possible. the additional capacitor improves transient immunity. for fast-rising v cc transients, additional capacitors may be required. figure 4. overvoltage protection figure 5. low-voltage sequencing using an nmosfet in gnd out c delay 0 to 28v r1r2 p r pullup v cc c cdelay en 3.3v always-on max16052 in gnd out c delay monitored 3.3v r1r2 n v cc c cdelay en 5v bus 1.2v input 1.2v output max16053 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 10 downloaded from: http:///
figure 6. multiple output sequencing package type package code outline no. land pattern no. 6 sot23 u6+1 21-0058 90-0175 dc-dc dc-dc dc-dc dc-dc 5v bus 3.3v 2.5v 1.8v 1.2v en en in in out out in out in out v cc system enable en v cc en v cc en v cc en c cdelay gnd gnd gnd c cdelay c cdelay gnd c cdelay en en max16053 max16053 max16053 max16053 max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits www.maximintegrated.com maxim integrated 11 package information for the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages . note that a +, #, or - in the package code indicates rohs status only. package drawings may show a different suffix character, but the drawing pertains to the package regardless of rohs status. chip information process: bicmos note: all devices operate over the -40c to +125c operating automotive temperature range.+ denotes a lead(pb)-free/rohs-compliant package. t = tape and reel, offered in 2.5k increments. part output pin- package top mark max16052 aut+t open-drain 6 sot23 +aclw max16053 aut+t push-pull 6 sot23 +aclx ordering information downloaded from: http:///
revision number revision date description pages changed 0 5/08 initial release 1 10/08 update adjustable delay (cdelay) and power-supply bypassing sections. 9, 10 2 1/10 revised the features, general description, absolute maximum ratings, electrical characteristics, typical operating characteristics, pin description , and the supply input (v cc ) sections. 1, 2, 3, 5C8 3 4/14 no /v opns; removed automotive reference from applications section 1 4 5/15 added the beneits and features section 1 5 3/16 updated package outline drawing number in ordering information table 12 maxim integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim integrated product. no circuit patent licenses are implied. maxim integrated reserves the right to change the circuitry and speciications without n otice at any time. the parametric values (min and max limits) shown in the electrical characteristics table are guaranteed. other parametric values quoted in this data sheet are provided for guidance. maxim integrated and the maxim integrated logo are trademarks of maxim integrated products, inc. max16052/max16053 high-voltage, adjustable sequencing/supervisory circuits ? 2016 maxim integrated products, inc. 12 revision history for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim integrateds website at www.maximintegrated.com. downloaded from: http:///

▲Up To Search▲

Price & Availability of MAX16053AUTTG7

	To Download MAX16053AUTTG7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .